Hyrax - Administrators Interface

From OPeNDAP Documentation
Revision as of 21:22, 6 October 2011 by Jimg (talk | contribs) (Installation & Configuration)

1 Overview

2 Installation & Configuration

When Hyrax and Tomcat are installed all of the software needed to run the Hyrax Administrative Interface (HAI) is in place. However, you will need to do three simple steps in order to turn it in and use it. First you will need to configure Tomcat to use Secure Sockets Layer (SSL, https) and add a user who can login to use the interface. Then you will need to perform minimal additional configuration steps in the two parts of Hyrax - the BES and OLFS. Be sure to skim the Configuration Notes subsection.


  • Tomcat 6 installed and working, and
  • Hyrax has been installed and simple responses work.
  • It's very likely that newer versions of Tomcat will work and it's also likely that you can use another servlet engine, but the specifics of the SSL/https configuration may e different.

2.1 Configuring Tomcat

In order to use the HAI you will need to configure your tomcat instance to enable SSL. This is very simple for most sites, and it might already be configured for you. We use SSL/https for communication with the HAI because we want to be sure that your server is secure and only those people who you want to control it can. There is a much more detailed document that describes the SSL/https configuration for tomcat at the Apache web site.

Make a Certificate 'keystore'
Use the command "keytool -genkey -alias tomcat -keyalg RSA" to make a keystore - a place where SSL certificates are stored so they can be used by the server - and add a single self signed certificate in it. Make sure to remember the password for the keystore! If your installation of Tomcat is already configured for SSL, skip this step - you don't need to make the keystore or the self-signed certificate. Also note that if the keytool program cannot be run from a terminal, try using it's full path with is $JAVA_HOME/bin/keytool (Unix/OSX) or %JAVA_HOME%\bin\keytool (Windows).
Turn on SSL/https
In the file $CATALINA_BASE/conf/server.xml remove the comment surrounding the "SSL HTTP/1.1 Connector" entry.
Add a Tomcat user
Open the file $CATALINA_HOME/conf/tomcat-users.xml and add a user for the interface. Hyrax uses, by default, the role 'manager', so if you already have a user in that role an want them to use the HAI, you are all set. If you don't have anyone set in the manager role, or you want a new user, add a line like the following: <user username="admin" password="hai" roles="manager"/>. If you don't have the role 'manager' defined, add it too: <role rolename="manager"/>
Restart Tomcat

2.2 BES

Edit the file $HYRAX_HOME/etc/bes.conf and remove the comments from the line BES.DaemonPort=11002

Restart the BES.

2.3 OLFS

Edit the file $CATALINA_HOME/content/opendap/olfs.xml and remove the comments around the line <adminPort>11002</adminPort>

2.4 Configuration notes

  1. Note that because the HAI is a web-based interface, with secure logins using SSL, you can use the interface with your server from anywhere in the world. It might be a good idea, however, to limit the IP addresses that can access the HAI.
  2. Using a self-signed certificate is fine, but you will see a warning box when you log in because self-signed certs are not trusted by browsers by default. Most browsers have an option that will suppress that warning or, although it involves some expense, you can get a certificate signed by a Certificate Authority and install that in the keystore
  3. More about tomcat users: Tomcat supports several authentication Realms including Memory realms, databases and LDAP. We document using memory realms here because other techniques, while better in some ways, are more cumbersome. If you are using memory realms, be sure to protect the tomcat-users.xml file because it contains plain text passwords.
  4. The <security-constraint> element in the $CATALINA_HOME/content/opendap/olfs.xml configuration file controls the level of access control for the HAI
  5. The role used by the HAI is set in the $CATALINA_HOME/content/opendap/olfs.xml configuration file using the <auth-constraint> element. You can switch roles by changing the <role-name>.

3 Using the Hyrax Admin Interface

Note: We often refer to the interface as either the HAI or just the interface.

To access the the interface, use the following URLs:

  • https://test.opendap.org:8443/opendap/docs/admin/index.jsp or https://test.opendap.org:8443/opendap/docs/admin/
  • http://test.opendap.org:8080/opendap/docs/admin

You will need to login using a user who is assigned the manager role as described above.

Once logged in, you will see a page with several links. Each one takes you to a different part of the interface so you can easily open them as tabs or separate windows in you browser.

Note that because the HAI is a web-based interface, with secure logins using SSL, you can use the interface with your server from anywhere in the world. It might be a godd idea, however, to limit the IP addresses that can access the HAI.

In order to understand this tool it may be helpful to review how Hyrax is structured: Hyrax is composed of one OLFS and one or more BES process. These are not required to be running on the same system.

4 OLFS Log Viewer

The OLFS Log Viewer controller is located at: https://test.opendap.org:8453/opendap/docs/admin/olfsLogView.jsp

The default page looks like this:

OLFS Log Viewer Default Page

4.1 Log Viewer Controls

Log Viewer Controls 1

Log Viewer Controls 2

4.2 Setting logging levels

Setting log levels 1

Setting log levels 2

Setting log levels 3

Setting log levels 4

5 BES Controls

The BES controller is located at: https://test.opendap.org:8453/opendap/docs/admin/besctl.jsp

The default page looks like this:

Default Admin Page

Beneath the "BES Management " banner you will see one or more tabs. You will always see a tab with the title of "/". This is the default BES for this Hyrax. If the particular installation of Hyrax has multiple BES configured in its OLFS they will appear here as tabs where the "prefix" for the BES from the olfs.xml file will be used as the tab title.

Admin Page Tour 1

Admin Page Tour  2

5.1 BES Configuration

BES Configuration 1

BES Configuration 2

5.2 Bes Logging

BES Logging 1

BES Logging 2

BES Logging Configuration 1

BES Logging 3

5.3 OLFS Connections

OLFS Connections 1

OLFS Connections 2