DAP4: DAP4 Grids Proposal

Grids Delenda Est

(with apologies to Cato the Elder)

The grid construct as originally established in the DAP2 protocol has been a source of problems from its inception. The evolution of the notion of coordinate variables makes its use in its current form (or even closely similar forms) untenable.

1. Problem: Grid as scoping/lexical container

This means that properly sharing coordinate variables is not possible without duplication, which is highly undesirable.

Consider the following situation.

    Arrays: D1(x,y), D2(y,z), D3(x,z).
    coord vars: x(x), y(y), z(z)

No grid, as currently defined can represent this because the three coordinate variables x(x), y(y), and z(z), cannot be properly distributed across needed three grids without duplication. The only way this can work is if all the Arrays and all the coordinate variables reside in a single grid; not, I maintain, a useful solution. Further, the Grid must change if new arrays are defined that use any of the coordinate variables, D4(x,w), for example.

2. Problem: Grid projections

When a projection is applied to a grid, the result cannot be a grid. This has been an ongoing source of problems in DAP2 where projecting the array component of a grid results in a structure. From the point of view of semantics, this is a really bad idea.

3. Problem: Multi-dimensional coordinate variables

When representing point data, it is desirable to have coordinate variables distinguished using more than a single dimension. Consider the following:

    array: temp(x,y,z)
    coordinate vars: lat(x,y,z), lon(x,y,z), and depth(x,y,z).

Here we are trying to represent point data where each point is defined by three dimensions: lat, lon, and depth. Grids are not capable of properly representing this case. I should note that neither is, for example, netcdf-3 or netcdf-4. CDM can do it, by only by encoding the proper relationships as attributes with complex internal structure.

4. Problem: Coordinate Variable Duplication In examining a large number of DAP2 DDS's, I note that coordinate variables inside grids are almost always duplicated outside the grid. My hypothesis has been that this a result of the fact of problem (1) above. In any case, this proposal below would obviate the need for duplication.

Proposal: Grid as mapping

Rather than making grids be scope containers, grids need to be simple relationship instances between an array and its coordinate variables. This would be done by associating the coordinate variables with an array variable. For example, the first case above (D1,D2,D3) might be represented as:

<variable name="D1"...>
   <map coordinate="x"/>
   <map coordinates="y"/>
 </variable>
...

The case of point data would be represented as follows:

<variable name="temp"...>
   <map coordinate="lat"/>
   <map coordinates="lon"/>
   <map coordinates="depth"/>
</variable>

Note that the dimensions can be inferred from the specified coordinate variables.

-Dennis Heimbigner